New feature unlocked! From this moment, all Flipper Zero units will have a built-in NFC module (13.56 MHz). Along with the 125KHz, it turns Flipper into an ultimate RFID device working on both ranges — Low Frequency (LF) and High Frequency (HF).

Flipper Zero will work with all the major standards, such as NXP Mifare. This is a new massive challenge for us. It adds a lot of work on the firmware side, and also complicates the antenna design, as both RFID antennas will need to be on the same PCB. We will do our best to accomplish it.

This is crazy — all the stretch goals were unlocked just in 15 hours. Thank you so much for all your support, we are just thrilled.